Music streaming from smartphone to vintage home radio Radiomarelli RD229 (1962) via AM transmitter for vintage radios Bluetooth AMarcord.

The AM transmitter for vintage radios with Bluetooth AMarcord allows you to play music on your vintage radios without the need for any modifications , keeping the originality of the radio unchanged.

Typology

Plastic cabinet with tube radio (12BE6, 12BA6, 12AV6, 12AT6,50B5,35X4)

General principle

Superheterodyne

Wave range

Medium wave (MW)

Operating voltages

Alternating Current (AC) Power / 110-240 Volt

Speaker

Elliptical magnetodynamic AP (permanent magnet and moving coil)

Materials

Plastic cabinet

Dimensions (WxHxD)

270 x 155 x 105 mm

Net weight

1.6 kg

Music streaming from smartphone to vintage portable radio  Standard Portable FM/AM Radio Solid State (1980) via AM transmitter for vintage radios Bluetooth AMarcord.

The AM transmitter for vintage radios with Bluetooth AMarcord allows you to play music on your vintage radios without the need for any modifications , keeping the originality of the radio unchanged.

 
Typology

Portable transistor radio

General principle

Superheterodyne; ZF/IF 460/10700 kHz

Gamme d’onda

Medium wave (MW) and FM

Operating voltages

Batteries / AA: 4 x 1.5 Volts

Speaker

Magnetodynamic AP (permanent magnet and moving coil)

Materials

Plastic (not Bakelite or Catalina)

Dimensions (WxHxD)

93 x 152 x 43 mm

Net weight

0.340 kg

Music streaming from smartphone to vintage radio/record player Geloso G3451 (1963) via AM transmitter for vintage radios Bluetooth AMarcord.

The AM transmitter for vintage radios with Bluetooth AMarcord allows you to play music on your vintage radios without the need for any modifications , keeping the originality of the radio unchanged.

Typology

Wooden cabinet with radio and record player tube (ECC85, ECH81, EBF89, ECL86).

General principle

Superheterodyne

Wave range

Medium wave (MW), 2 shortwave ranges and FM

Record Player

Record player with 4 speeds. Detector head: piezoelectric

Operating voltages

Alternating Current (AC) Power / 110; 125; 160; 220; 240 Volts

Speaker

Elliptical magnetodynamic AP (permanent magnet and moving coil)

Materials

Wooden cabinet

Dimensions (WxHxD)

410 x 240 x 340 mm

Net weight

8.8 kg 

Music streaming from smartphone to vintage portable radio Autovox Transmobil 3 (1965) via AM transmitter for vintage radios Bluetooth AMarcord.

The AM transmitter for vintage radios with Bluetooth AMarcord allows you to play music on your vintage radios without the need for any modifications , keeping the originality of the radio unchanged.

Typology

Portable transistor radio and combined car radio, with lockable mounting plate type AL 222 for use in 6 or 12 V cars with external loudspeaker.

General principle

Superheterodyne

Wave range

Medium waves (OM) only.

Operating voltages

Batteries (accumulators and/or dry) / 4 x 1.5 Volt

Speaker

Magnetodynamic AP (permanent magnet and moving coil) / Ø 8 cm

Materials

Plastic

Dimensions (WxHxD)

180x150x60mm

Net weight

1.2kg

Music streaming from smartphone to vintage car radio Autovox Piper RA314 installed on Fiat 600 D Multipla 1964 via AM transmitter for vintage radios Bluetooth AMarcord.

The AM transmitter for vintage radios with Bluetooth AMarcord allows you to play music on your vintage radios without the nee d for any modifications , keeping the originality of the radio unchanged.

The AM transmitter for vintage radios with Bluetooth AMarcord allows you to play music on your vintage radios without the need for any modifications, keeping the originality of the radio unchanged.

Most tube and transistor radios and/or car and crystal radios receive only the medium wave range, frequencies from which national broadcasters have long since ceased to broadcast, remaining “voiceless” trappings.

To overcome this and make these radios and/or car radios work again without tampering with them in any way, the AM transmitter for vintage radios with Bluetooth AMarcord allows you to transmit music or other things in medium waves (AM), using your smartphone or PC as audio source via Bluetooth connection.

A single device AM transmitter for vintage radios with Bluetooth AMarcord can be used for both vintage home radios and vintage medium wave car radios. In the case of vintage home radios, just place the loop antenna of the AM transmitter for vintage radios with Bluetooth AMarcord nearby and tune the vintage radio to the transmitter’s emission frequency to reproduce from the loudspeaker what is transmitted from your smartphone or PC. In the case of vintage car radios, the signal is transmitted via the antenna splitter cable.

The AM transmitter for vintage radios with Bluetooth AMarcord has a long-lasting rechargeable internal battery and can be easily recharged using the supplied USB cable.

The USB charger for bicycle dynamo B-CHARGE to be connected to the dynamo is now an indispensable accessory for those who go out in the saddle and never want to find themselves with a flat battery of their mobile phone, GPS navigator or tablet. Technology has taken over our beloved bicycles and having a satellite navigator or a smartphone with you is also a nice convenience, but electronic devices consume energy and batteries have little life. The solution to avoid discharging batteries is the USB charger for bicycle dynamo B-CHARGE , a small converter that transforms the alternating current into direct current where the current is produced by a bicycle dynamo (technically an alternator).