Description
The AM transmitter for vintage radios with Bluetooth AMarcord allows you to play music on your vintage radios without the need for any modifications , keeping the originality of the radio unchanged.
Most tube and transistor radios and/or car and crystal radios receive only the medium wave range, frequencies from which national broadcasters have long since ceased to broadcast, remaining “voiceless” trappings.
To overcome this and make these radios and/or car radios work again without tampering with them in any way, the AM transmitter for vintage radios with Bluetooth AMarcord allows you to transmit music or other things in medium waves (AM), using your smartphone or PC as audio source via Bluetooth connection.
A single device AM transmitter for vintage radios with Bluetooth AMarcord can be used for both vintage home radios and vintage medium wave car radios. In the case of vintage home radios, just place the loop antenna of the AM transmitter for vintage radios with Bluetooth AMarcord nearby and tune the vintage radio to the transmitter’s emission frequency to reproduce from the loudspeaker what is transmitted from your smartphone or PC. In the case of vintage car radios, the signal is transmitted via the antenna splitter cable.
The AM transmitter for vintage radios with Bluetooth AMarcord has a long-lasting rechargeable internal battery and can be easily recharged using the supplied USB cable.
Technical data:
Dimensions: 76 x 58 x 21mm.
Weight: 300g.
Frequency modulator
Transmission in AM frequency between 700 and 800Khz.
Input amplification 50%.
Output power 50mW.
Bluetooth
Bluetooth 4.1 receiver module.
Support profile: A2DP / AVCTP / AVDTP / AVRCP / HFP.
Battery
Internal 650Mah rechargeable lithium battery.
Loop antenna
Impedance 75Ohm.
Max transmission capacity ~50cm distance.
Splitter cable for car stereo
The car radio splitter cable, in addition to being connected to the car radio input, must be connected to the car’s antenna cable for proper antenna tuning.
Contents of package:
– AM transmitter for vintage radios with Bluetooth AMarcord complete with USB cable for recharging.
– Loop antenna for vintage home radio (optional)
– Splitter cable for vintage car stereo (optional) Made in Italy
Made in Italy
excellent product has solved the problem on my vintage car radio installed on the alfa romeo giulietta
AMarcord ha fatto felice il nonno che finalmente può di nuovo sentire la musica dalla sua radiolina tascabile degli anni 70 che ormai era rimasta inutilizzata in un cassetto.
Funziona perfettamente con una vecchia radio a valvole Geloso anni 50. Funzionamento semplice basta avvicinare l’antenna alla radio per trasmettere la musica dallo smartphone!